ServicesShed Removal
Shed Removal in Plumas Lake
An old shed with a soft floor, rusted panels or a sagging roof takes up yard space and invites pests. We take it apart by hand, load every panel, beam and fastener, and leave the ground raked and ready for whatever comes next.

When Taking the Shed Down Is the Right Call
Most sheds come down for one of two reasons. Either the structure has failed, with a rotted floor, a leaking roof or a door that no longer closes, or you want the space back for a patio, a garden bed or a newer building. Repairs can make sense when only the roof or one wall is gone. Once the floor joists or skids underneath are soft, the honest answer is usually removal.
Long, hot summers are hard on resin and asphalt shingles, and wet winters work on the wood that sits closest to the soil. We look at the whole structure during the estimate and tell you plainly whether we think it is worth saving.
Shed removal pairs naturally with our other work. If the shed is full, we clear the contents first, and if you are also opening up the yard, yard debris removal can happen in the same visit.
What Our Shed Removal Covers
Clearing the contents
Old paint cans, mowers, holiday boxes and broken tools come out before the walls do. You set aside anything you want to keep, and we load the rest.
Hand dismantling
We take sheds apart panel by panel rather than pulling them over. That keeps fences, sprinkler lines and nearby plants out of harm's way and makes the load cleaner to sort.
Wood, metal and resin sheds
Wood sheds with T1-11 siding and shingle roofs, galvanized steel kits held together with hundreds of small screws and molded plastic units each come apart differently. We bring the tools for all three.
Floor and skid removal
Plywood floors, pressure-treated skids and the concrete blocks they often sit on are all part of the job. Nothing is left buried in the grass.
Sorting for recycling
Clean metal panels and framing are separated from mixed debris where facilities accept them, so less of your old shed ends up as landfill.
Ground cleanup
We pick up screws, nails and shingle grit, then rake the footprint so the spot is safe to walk on barefoot or mow over.

Signs Your Shed Is Ready to Go
- A floor that gives underfoot
- Soft spots mean the plywood or the skids beneath it have rotted. Patching the surface rarely fixes a frame that is failing from below.
- Rust through the panels
- Surface rust on a metal shed is cosmetic. Holes along the bottom edge or around the screws mean water is getting in and the panels are losing strength.
- A leaning or racked frame
- Doors that bind or walls that are visibly out of square usually point to a shifted base. A shed in that state can fold under wind or a heavy limb.
- Pests moving in
- Rodent droppings, wasp nests under the eaves and black widows in the corners all settle into neglected sheds. Removing the structure removes the shelter.
- Brittle or cracked resin
- Plastic sheds fade, then crack at the corners and roof seams after years in strong sun. Once they split, they cannot be sealed in any lasting way.
How a Shed Removal Day Runs
- 1
Estimate by phone, then on site
You tell us the shed's size, material and what is inside. We confirm on site and give you the price before any work begins.
- 2
Prep and safety check
We check for wiring, wasp nests and anything leaning against fences. If the shed has power run to it, an electrician needs to disconnect it before we start, and we will tell you so up front.
- 3
Empty, then take down
Contents come out first. The roof comes off next, then the walls, then the floor and skids, with materials stacked on tarps as we go.
- 4
Load, sweep and rake
Everything goes onto our truck. We finish by clearing fasteners and debris from the footprint and walking the area with you before we leave.
What Moves the Price of Shed Removal
Shed removal is priced by the work and the volume, and we quote it after seeing the structure. We offer free, no-obligation estimates and upfront pricing, no surprises. These are the factors that make one shed cost more than another.
- Size and material
- A small resin unit comes apart in minutes. A large wood shed with a shingle roof and a framed floor takes longer and fills more of the truck.
- What is inside
- An empty shed is quicker than one packed with years of storage. Heavy items such as old mowers or bags of concrete add weight and loading time.
- Access to the backyard
- A wide side gate and a short carry keep labor down. Narrow paths, steps or a shed tucked behind landscaping mean more trips by hand.
- The base underneath
- Skids and blocks are part of a standard removal. A poured concrete slab is a separate job handled under light demolition, and we price it on its own so you can decide.
Shed Removal Questions
- Do I need a permit to remove a shed?
- Taking down a small backyard shed usually does not require a permit, but rules vary by jurisdiction and some neighborhoods have their own guidelines. If you are unsure, check with your city or county before the removal date. We are happy to talk through what we know on the phone.
- Can you take down the shed and leave the concrete slab?
- Yes. Many people keep the slab for a new shed, a hot tub pad or a seating area. We remove the structure and anchors down to the concrete and sweep the surface clean.
- My shed still has power. Can you remove it?
- Yes, once an electrician has disconnected the circuit and made it safe. We do not cut or cap live wiring ourselves. Mention any power to the shed when you call so we can plan the day around it.
- What happens to the materials?
- We separate metal and clean wood from mixed debris where recycling facilities take them. Treated lumber, shingles and broken resin go to the appropriate disposal site.
- Do I have to empty the shed first?
- No. Clearing the contents is part of the job. Just pull out anything you want to keep, or point it out on the day and we will set it aside.
Get Your Yard Space Back
Tell us about the shed and what is inside, and we will explain how we would take it down and what affects the price. We work throughout Plumas Lake and nearby towns including Olivehurst, Wheatland and Marysville.